Chevy G20 Van Fan Shroud Removal

This page has free videos, resources, e-books and more dedicated to Radiator Fan Shroud and Chevy G20 Van Fan Shroud Removal!


Posted on

Mute the speaker Listen to this using a male or female voice M/F 

By Gregory Crews

The fan shroud on a Chevrolet G20 van is used to direct air flow from the coolant fan to the engine. The fan and coolant work together to keep the engine cool even during harsh driving conditions. The shroud is held on by only four bolts, but working under the hood of a Chevy van is tight, as space is very limited. Removing the air intake hose will simplify the task of removing the fan shroud.

Mute the speaker Listen to this using a male or female voice M/F Open the hood to access the engine compartment. Locate the air intake hose connected to the back of the grill. Pull the hose away by hand and place it to the side.

Mute the speaker Listen to this using a male or female voice M/F Unscrew the four bolts securing the shroud to the radiator, using a socket wrench. If your G-20 has the reservoir attached, unscrew the bolts with a socket wrench and place the reservoir to the side, away from the shroud. Pull the overflow line off the spout at the radiator cap.

Mute the speaker Listen to this using a male or female voice M/F Pull the shroud away from the engine by lifting it up and tilting the bottom away from the fan. Place to the side when done.

Share on Facebook Share on Twitter Email Gmail Yahoo! More...


More Radiator Fan Shroud Information

 Radiator Swap
FREE E-Book
 Cooling Fan Motor
FREE E-Book
 99 014e Honda Tech
FREE E-Book
x